Kelly's Custom Guitar Shop!

Thought a few of you shredders may want to get a custom job for your axe.

Here are some samples of full custom jobs (custom body/neck paint and electronics/hardware upgrades):

$600 - (SOLD)- Ibanez RG320DX "Black Snake I" upgradedwith new Floyd Rose, EMG 81 & 85 active pups, new stereooutput jack, 9V battery compartmentand all new 25K pots. Painted Black Snake (gray scale seperators)pattern on front and sides, with the gray underbelly (black scale seperators)on back and black snake scales on neck/headstock:








$500 - (SOLD)- Ibanez RG320DX "Black Snake II", upgraded with new Floyd Rose trem, EMG HZ pups with new 500K pots. Same paint pattern as BS1 except no gray under belly:






$500 - (SOLD)- Ibanez RG320DX "Metal Mesh", upgraded with new FR trem, Seymour Duncan DimeBucker pup. Painted a silver metallic mesh pattern on front and flat part of back, leaving sides and belly cut black. Painted neck black.









Paint only:

$400 - (SOLD)- Ibanez RG320DX "Radio Active" Custom 3 layer crackle finish with a cobalt blue base, translucent emerald green and neon green crackle coats, left in a textured 3D high gloss finish.






Custom Bodies:

$200 - (SOLD)- "Hot Lava" Charvel San Dimas Repro. 3 layer custom crackle with numerous flame/heat tones covered by a slate gray crackle coat sanded flat.



</

[Kelly Mitchell]

Thanks Crocky! Just wait until I upgrade my equipment!

[iOD!NE]

Ibanez JS Series...but can't afford it right now! Since our epic strike of '07 I managed to get back to work for less than a month before I got layed off for work shortage! Go figure! Haven't worked since the end of Nov. last year....One big freakin holiday! So...lemme get back to work and then we'll line some thing up!

[Mark Holley]

talk to Dan Kelly... He might be interested in one of those beauties!

[Kelly Mitchell]

Originally Posted by iOD!NE

Ibanez JS Series...but can't afford it right now! Since our epic strike of '07 I managed to get back to work for less than a month before I got layed off for work shortage! Go figure! Haven't worked since the end of Nov. last year....One big freakin holiday! So...lemme get back to work and then we'll line some thing up!

C'mon now, I thought you were "Rich".

I know the feeling bud, we'll get it going down the road. I hope you guys get back to work soon!

[iOD!NE]

Just looked at my 78 Strat and the back is nothing the same...only has the one backing plate...not sure what that could be Kelly!

[iOD!NE]

Wrong forum...doh!

[Kelly Mitchell]

Hehe. People reading this thread are now thoroughly confused.

[Kelly Mitchell]

My latest, I'm calling it "Alien Crime Scene":







It's a shame an alien had to die for this one.

[gitrplar]

Yes Brother deffo some real fine work there. Just might be interested in getting my JS100(Ibanez) a new face lift. Don't know what though, open to sugesstions. Want to keep the Candy Red as dom Color.

[Kelly Mitchell]

Mmmm, rich creamery JS 1000... drool. I'm looking at one now on the cover of Satch's "One Big Rush". Do you like that Prestige neck over the Wizards? I know the Wizards tend to crack at the headstock joint, but they are as fast as a drag queen leaving a tractor pull... (I've always wanted to use that one).

I've always loved black and red... gives a Batman kinda vibe. Could do just about anything you'd like keeping the red dominant Dan.

Another direction I plan on going with my axe is to do a reflective chrome/mirrorfinish around the edges to create an axe blade effect, keeping the dominant color in the center. I think that would be cool as Joe has a few mirroed models doesn't he? It would be a bit of a cross breed, so to speak. I will add some blood on my axe blade of course, but mine is shaped somewhat like a medievel axe already:



The most convenient option, but a bit more expensive, would be to find a JS body, do it up how you want it, and ship it to you. That way you would have a spare and not have togo without your axe for a week or two.

Let me know Dan.

Thanks!